What would a recorder's life be without the right accessories?
That's right!
It would be more colourless. So that you can make your recorder life as colourful as possible, we have listed a colourful mixture of sensible and useful recorder accessories for you on the following page.
The 2.0m extension cable for micK (mini XLR male/3P-M to mini XLR female/3P-F) allows you to increase the distance between your instrument and mixing console or amplifier.
A very useful accessory that you should always have with you.
Cables can never be too long, but they can be too short ;-)
This little helper takes the strain off your wrist.
The adjustable thumb rest is securely attached to the instrument with three small screws.In addition to the support surface for the thumb, it has a small ring to which the hook of a strap can be attached.
The height of the thumb rest can be fine-tuned using the knurled screw. Thanks to the wide slot, the knurled screw can also be securely fastened with a small coin, for example.
Our recommendation: Before fitting, hold the recorder in your hand several times and use small pencil strokes or half of your thumb on an adhesive strip to determine the optimum position for the thumb rest.You will be amazed at how differently you hold your hand.Take your time. the reward for good preparatory work is a relaxed right hand in the long term. In addition to the good feeling you have, others will also listen to your music!
This little helper takes the strain off your wrist.
The adjustable thumb rest is securely attached to the instrument with three small screws.In addition to the support surface for the thumb, it has a small ring to which the hook of a strap can be attached.
The height of the thumb rest can be fine-tuned using the knurled screw. Thanks to the wide slot, the knurled screw can also be securely fastened with a small coin, for example.
Our recommendation: Before fitting, hold the recorder in your hand several times and use small pencil strokes or half of your thumb on an adhesive strip to determine the optimum position for the thumb rest.You will be amazed at how differently you hold your hand.Take your time. the reward for good preparatory work is a relaxed right hand in the long term. In addition to the good feeling you have, others will also listen to your music!
The Audix APS910 Phantom Power Adapter is compatible with the Wp1x and micK microphones.
In order to connect the microphones for recorders to a mixing console, you need a power supply for the microphone.
This is called phantom power. If the WP1X (Rumberger) or micK (Kunath Instrumentenbau) microphones are operated via a transmitter, you do not need an additional power supply. However, if you want to connect the microphones directly to a mixing console, the microphones require phantom power between 9-52V.
The Audix APS910 takes this voltage from the audio console and adapts it to the microphone accordingly.
The Audix APS910 is therefore a phantom power supply. It has both a mini XLR connector for your microphone and an XLR connector that connects to your mixer or microphone cable. The APS910 ensures that power is supplied to the correct pins for energy-efficient electret microphones.
Technical data Input connectors: Mini XLR socket Output connector: 3-pin XLR plug Adapter: Converts 9-52V phantom power to less than 9V for electret microphones. Battery: No Power supply from mixer: 48V phantom power Dimensions: 7.6 x 2.0 cm diameter Weight: 171g
Clip-on thumb rests are an optimal solution for plastic recorders. The surface of plastic recorders is so hard that these thumb rests do not cause any damage to the instrument. If you want to use these thumb rests on wooden recorders, we recommend that you are careful not to scratch the surface of the wooden instruments.
Clip-on thumb rests are an optimal solution for plastic recorders. The surface of plastic recorders is so hard that these thumb rests do not cause any damage to the instrument. If you want to use these thumb rests on wooden recorders, we recommend that you are careful not to scratch the surface of the wooden instruments.
Clip-on thumb rests are an optimal solution for plastic recorders. The surface of plastic recorders is so hard that these thumb rests do not cause any damage to the instrument. If you want to use these thumb rests on wooden recorders, we recommend that you are careful not to scratch the surface of the wooden instruments.
Clip-on thumb rests are an optimal solution for plastic recorders. The surface of plastic recorders is so hard that these thumb rests do not cause any damage to the instrument. If you want to use these thumb rests on wooden recorders, we recommend that you are careful not to scratch the surface of the wooden instruments.
Larger recorders are easier to play if you put a strap around your neck and ""magic"" the weight away.This is good for your wrists. This special strap has another very special advantage: It is flexible. This means that it reliably supports the weight of the recorder, but still gives a little at the crucial moment when you need a little more freedom of movement.And afterwards, it ensures that new reserves of movement are available again.Of course, it is not the cheapest strap. But it is definitely the best!
A bird chirping whistle is great fun for small children. It is filled with a little water and then starts to chirp when you blow into the tail.
A nice souvenir.
Discover the ideal care for your recorder with our high-quality recorder oil. Packaged in a practical 100 ml amber glass bottle, this oil not only provides the necessary care, but also protects against harmful environmental influences. The brown colour of the bottle has been deliberately chosen to protect the contents from UV light and thus extend the shelf life of the oil.
Why is recorder oil important?
The use of recorder oil ensures optimum care of the wooden material of your recorder. It prevents cracking, preserves the natural moisture and ensures an excellent sound. With just a few drops, you can keep the wood supple and significantly extend the life of your instrument.
Application:
The application is very simple. Apply a few drops of recorder oil to a soft cloth and gently wipe over the unvarnished surfaces of your recorder. You can find detailed instructions here.For best protection, repeat this process regularly, especially after intensive use.
Conclusion:
Trust in the quality of our recorder oil and give your instrument the care it deserves. With a 100 ml bottle in an attractive brown colour, you get a product that is not only functional but also appealing to use.
Care for your recorder with care - for sonorous moments and a long life!
Product number:
BS-515-BFS
Manufacturer:
Blockfloetenshop
€12.00*
Free shipping
Shipping within 24h
30 days money back guarantee
Purchase comfortable on account
Hotline +49 800 123 454 321
This website uses cookies to ensure the best experience possible. More information...